PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 39

Owner's Manual
FireWire Input
Select Switch
Do not engage this button when your StudioLive is not connected and
synced to a computer, as it will mute the analog input globally.
Input-Channel Select
Button
Solo Button
Mute Button
Turns FireWire Playback Streaming On/Off.
The FireWire Input button routes a playback stream
from your audio software to the StudioLive's
channel inputs, where it is routed and processed
the same way as analog input signals. For example,
if you want a particular recorded track to play
back on mixer channel 3, simply route that track
in your audio software to StudioLive Output 3.
This button can also be used to insert a plug-
in effect into the mix. For more information on
this feature, please review Section 6.4.2.
Enables Fat Channel Processing and Routing.
As previously described in Section 4.1.1, the Select
button routes its channel through the Fat Channel,
allowing you to add dynamics processing, EQ, and
panning; assign the output routing; and more.
Turns Soloing On and Off.
This button will solo its channel to the main
outputs or to the monitor outputs, depending
on whether PFL or SIP is selected in the Solo bus
section. Please review Section 8.8 for details.
When a Solo button is enable, that channel
or bus will automatically be selected, and
its Select button will illuminate.
Turns Muting On and Off.
This button mutes its channel. It will illuminate red
when the channel is muted. When a mute button
is engaged, its channel will be muted in all of its
assigned outputs (Subgroups, Mains, and Aux Sends).
Controls 4
Input Channel Strip 4.3
39 39