Fat Channel Panning And Stereo Link - PRESONUS STUDIOLIVE 24.4.2 Owner's Manual

Owner's Manual
Fat Channel LIMITER Section
Limiter Turns on the Limiter for the Selected
On/Off
Input Channel or Output Bus
When the limiter is engaged the
button will illuminate. The threshold
for the limiter is set to 0 dBFS. The
Ratio is ∞:1.

4.1.4 Fat Channel Panning and Stereo Link

Stereo linking is done within the Fat Channel. Input channels, aux
buses, and subgroups can be linked to create a stereo pair. The stereo
pairs are predefined and cannot be changed. They are as follows:
Channels 1 and 2
Channels 3 and 4
Channels 5 and 6
Channels 7 and 8
Channels 9 and 10
Channels 11 and 12
Channels 13 and 14
Channels 15 and 16
Channels 17 and 18
Channels 19 and 20
A stereo link can be enabled when either channel in the pair is selected.
When the Stereo Link button is illuminated, all dynamics settings, subgroup
assignments, and main assignments are pasted to the other channel in the pair.
Note that this is a nondestructive paste; when the Link button is disengaged,
the other channel's previous settings will be restored. For instance, if Channel 8
is selected when the Stereo Link button is engaged, all of Channel 8's settings
will be copied onto Channel 7. If Channel 7 is selected when the Stereo Link
button is engaged, Channel 7's settings will be copied onto Channel 8.
Limiter Sets and Displays the Threshold of
Threshold
the Limiter for the Selected Channel
Control or Output Bus.
This encoder sets, and the meter
displays, the threshold of the limiter
for the selected channel or output
bus. When the signal's amplitude
(level) exceeds the threshold setting,
the limiter is engaged. Turning the
knob counterclockwise lowers the
threshold, so limiting begins at a
lower amplitude. The threshold
can be set from -56 to 0 dB.
The Pan Control for each Input or Output bus is set
on the Fat Channel. The LED display shows the Pan
setting, and the encoder to the right of the display
controls panning for the selected input or output
bus. When two channels are linked as stereo pair, the
LED display will automatically change to stereo pan.
Channels 21 and 22
Channels 23 and 24
Aux 1 and Aux 2
Aux 3 and Aux 4
Aux 5 and Aux 6
Aux 7 and Aux 8
Aux 9 and Aux 10
Subgroups 1 and 2
Subgroups 3 and 4
Controls 4
Fat Channel 4.1
35 35