Creating Midi Tracks - PRESONUS STUDIOLIVE 24.4.2 Owner's Manual

7 SOFTWARE — Universal Control, Capture and StudioLive Artist
7.4 Studio One Artist

7.4.6 Creating MIDI Tracks

114
3. Once you have added your tracks, you can assign the
input by simply clicking on the input to which a track
is currently assigned. This will bring up the inputs list.
You can also access the audio I/O setup from here.
If you would like to add a track for each of the available
inputs and have the routing automatically assigned,
simply go to Track | Add Tracks for All Inputs.
To begin recording, create an audio track, assign it
to input 1, and connect a microphone to the first
channel on the StudioLive. Select Record Enable on
your track in Studio One Artist. Turn up the Channel
1 fader while speaking/singing into the microphone.
You should see the input meter in Studio One Artist
react to the input. Adjust the gain so the input level
is near its maximum without clipping (distorting).
Connect a set of headphones to the StudioLive headphone output and select
the Main button in the Monitor section on your StudioLive. You may also wish
to connect monitors to the StudioLive's control-room outputs. You are now
ready to record. For complete instructions, please consult the Studio One
Reference Manual, which is located on your Studio One Artist installation DVD.
1. Click on the Add Tracks button. When the Add Tracks
window launches, select Instrument as the track format
and click the OK button.
2. To assign your MIDI input, click on the MIDI Inputs
list and select your external sound module.
If you have added virtual inputs to your session,
you will also see them as available inputs.
If you selected your MIDI keyboard controller as the
default keyboard, it will already be selected. If not, choose
your MIDI controller from the Output menu directly below.
3. To the left of the Add Track button, you will
find the Inspector button. Click it to display
more parameters for the selected track.
PreSonus StudioLive 24.4.2
™