Enabling The Audio Driver - PRESONUS STUDIOLIVE 24.4.2 Owner's Manual

Owner's Manual

7.4.2 Enabling the Audio Driver

Start Page: Setup Area
Start Page: Setup Area
SOFTWARE —Universal Control, Capture and StudioLive Artist
source of the content will be the same DVD from which you installed Studio One
Artist. By default, Studio One Artist will point to your DVD drive as the content
source. Listed in the installation menu are separate entries for each available item.
Click the checkbox next to each item you wish to install, then click on the Install
Packets button at the bottom left of the menu to install the selected content.
• When finished installing content, click on the Done button to exit the menu.
Studio One Artist content can be installed at any time by accessing
the Help/Studio One Installation menu. If you choose not to install
any portion of the content, you can install it at a later time.
Studio One and Studio One Artist were designed with PreSonus interfaces
in mind. Your StudioLive is already integrated into Studio One Artist, so
setup is quick and easy. When Studio One Artist is launched, by default
you will be taken to the Start page. On this page, you will find document-
management and device-configuration controls, as well as a customizable
artist profile, a news feed, and links to demos and tutorials from PreSonus.
If you have an Internet connection on your computer, these links will be
updated as new tutorials become available on the PreSonus Web site.
Complete information on all aspects of Studio One Artist is available in the
Reference Manual PDF located on the Studio One Artist installation disc. The
information in this tutorial covers only the basic aspects of Studio One Artist
and is intended to get you set up and recording as quickly as possible.
Shows Active Audio Driver and Sample Rate and Provides
Quick Links to Configure Audio and MIDI
Selecting a Different Audio Driver from the Start Page
After you have verified that the PreSonus FireStudio Universal
driver has been detected, please continue to the next sectionto
set up your external MIDI devices. If you do not have any MIDI
devices to connect at this time, please skip to Section 7.4.4.
In the middle of the Start page, you will see
the Setup area. Studio One Artist automatically
scans your system for all available drivers
and selects a driver. By default, it will choose
a PreSonus driver if one is available.
Your StudioLive uses the same driver as the FireStudio
family of interfaces. If you do not see "PreSonus
FireStudio" on the Start page when you launch Studio
One, click on the Configure Audio Devices link in the
Setup area to open the Audio Setup Options window.
In the Audio Device menu, select "PreSonus
FireStudio. " Click the Apply button and then OK.
7
Studio One Artist 7.4
109