PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 50

4 Controls
4.8 Digital FX | Master Control
50 50
The Next button will scroll through this screen in the following order: FX A library
selection, FX A main parameter, FX B library selection, FX B main parameter. When
choosing your effects preset, use the Value encoder to scroll through the library.
When you have arrived at your selection, press the Recall button to load it.
For example, if you would like to change the effect from a Large Hall
reverb to a Room Ambiance reverb, press the Recall button to load
the effect and then change the various parameters to taste. Press the
Page Up button again to move to the full parameter view of FX B.
When you choose a delay algorithm, you will notice
two parameters: Time (ms) and Time X.
Time is the delay time, discussed in Section 8.6.2, which is the time
between the source sound and the echo. This can be adjusted
manually, with the Value encoder, or you can use the Tap button
to enter a delay time in tempo with the music being played.
Time X is the value of the beat you are using as a reference for the tempo.
The basic unit of measure is a quarter note, so for example, if the beats you
are tapping represent quarter notes in the music, you would set Time X to
1.00. If they are eighth notes, you would set Time X to 0.50; half notes would
be 2.00, and so on. In this way, you can precisely synchronize or syncopate
the delay echoes to the music in real time. You do not have to select the
Time parameter in order to use the Tap button. However, you have to be
on the Extended Parameters page 2 for FX A, page 3 for FX B), or you must
select the Time parameter for the desired effect on the first screen of the FX
menu. The Tap button does not function when any other page is active.
Pages 4 and 5 allow you to store your changes for FX A and FX B, respectively, to
the same location or to a new location, and to customize the name of your creation.
Use the Value Encoder to change the library location to which you will store your
new effects preset, unless you wish to overwrite the currently selected preset
location. Press the Next button to navigate to the first letter of the preset name.
Once you are satisfied with your changes, press the Store button, which will
illuminate while the effects preset is written to the StudioLive's internal memory.
Once the preset is saved, the Store button will return to its unlit status.
PreSonus StudioLive
Press the Page Down button to move to the next
page of the FX menu. Pages 2 and 3 of the FX
menu display the rest of the parameters for FX
A and FX B, respectively. These parameters will
change depending on what type of effect you have
chosen. Again, use the Next and Prev buttons to
navigate through the screen and use the Value
encoder to change the selected parameter.
Turn the Value Encoder clockwise or counter-
clockwise to change the letter. The StudioLive
allows you to customize the name with
uppercase and lowercase letters and a selection
of numerals and punctuation marks. Press
the Tap button to quickly insert a space.
24.4.2
™