PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 96

7 SOFTWARE — Universal Control, Capture and StudioLive Artist
7.3 Capture
Using Markers
Looping
96
In Capture, the Marker Lane is used to place markers at desired
places in the Timeline, after which navigation to the markers is
easy. Markers are also helpful when exporting your Session to
individual mixes or to work in another recording application.
The Marker Lane is always visible, just below the Timeline.
Inserting Markers
To insert a new Marker into the Marker Lane, with playback running
or stopped, click on the Add Marker button, or press [Insert] on the
keyboard. Each new marker will be numbered sequentially by default (#1,
#2, #3...). To rename a marker, double-click on the marker in the Marker
Lane, type in a new name, and then press [Enter] on the keyboard.
Navigating Markers
It is possible to quickly jump the Playback Cursor between markers in
the Marker Lane. Click on the Previous Marker button in the Transport,
or press [B] on the keyboard, to jump to the previous marker. Click on
the Next Marker button in the Transport, or press [N] on the keyboard,
to jump to the next marker. Jumping to markers during playback allows
quick comparisons between different sections of your Session.
1. Select an Event with the Arrow Tool, or select a
Range with the Range Tool, that you wish to loop.
2. Press [P] on the keyboard to set the loop range to your
selection. The range will be indicated by a bar drawn in
the timeline with a left and right flag on either end.
3. Click on the Loop button in the Transport, or press [L] on
the keyboard to engage Loop mode. Start playback before
the end of the Loop range, and when the end of the range
is reached, playback will jump back to the beginning of the
Loop range automatically for as long as Loop is engaged.
Engaging Record in the Transport will disable Loop Mode
and begin recording at the current playback cursor position.
It is not possible to engage Loop while recording.
PreSonus StudioLive
To Loop the playback of any range of your
Capture session, do the following:
24.4.2
™