PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 41

Owner's Manual
Output Level Control
Aux Send Select Button
Mix Button
Mix|Pan Button
Adjusts the Master Output Level of the Aux Send.
This knob adjusts the master output level of the aux send.
Enables Fat Channel Viewing.
As previously described in section 4.1.1, the Select button routes its aux send
through the Fat Channel, allowing you to add dynamics processing and EQ.
Enables Aux Bus Mixing in the Fat Channel.
When the Mix button is pressed once, the 24 encoder knobs in the Fat Channel
become the aux-send level controls for each of their respective input channels. The
meters will display the send amount for each of the input channels.
Press the Mix button a third time to disengage Aux Mix mode.
Enables Pan Control and Metering in the Fat Channel
(Stereo Send Mode Only).
On Aux Sends 2, 4, 6, 8, and 10 the Mix button becomes the Pan control when
two sends are linked. When this button is enabled, the 24 encoders in the Fat
Channel become the pan controls for each of their respective input channels.
The meters will display the pan setting of each of the input channels.
Press the Mix|Pan button a second time to disengage Aux Mix Pan mode.
For more information of stereo linking, please review Section 4.1.4
Pressing the Mix button a second time will switch
the first six meters and encoders to become the
aux-send level controls for the Main FireWire
Return, Analog Tape In, Aux Input A, Aux Input B,
the output of FXA and FXB, and the Talkback mic.
While in this mode, the Mix button will remain
illuminated, and LEDs at the top, middle, and
bottom of meters 7-24 will also illuminate.
Controls 4
Aux Sends 4.4
41 41