PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 81

Owner's Manual
Loading an Entire Fat Channel Preset
Loading an FX Preset
Loading a GEQ Preset
SOFTWARE —Universal Control, Capture and StudioLive Artist
To load every component in a Fat Channel preset
(Gate, Compressor, EQ), select it from the Browser
window an drag it over any part of the desired
channel. If you drag it over any of the component
quick views, it will load only that component (i.e. if you
drag a preset over the Gate Quick View, only the Gate
will be loaded)
To load an FX preset, select it from the Browser
window an drag it over any part of the desired FX bus
in the Master section of the Overview tab. Once it is
loaded, you can use the FX Type menu to change the
effect and create new presets.
To load a graphic EQ preset, select the preset from
the Browser window and drag it over any part of the
graphic EQ in the Master section of the Overview tab.
Once it is loaded, you can use the sliders in VSL or the
encoders on the StudioLive to make adjustments.
Note that you must be on the GEQ page in the System
menu to have control over the graphic EQ in VSL
from the StudioLive. See section 5.4 for details.
7
VSL: Virtual StudioLive 7.2
81