Consider Every Device On Your Network; View Or Change Wireless Settings - NETGEAR DGN1000-100NAS User Manual

N150 Wireless ADSL2+ Modem Router DGN1000 User Manual

Consider Every Device on Your Network

Before you begin, check the following:
Every wireless computer has to be able to obtain an IP address by DHCP from the router
•
as described in
Each computer or wireless adapter in your network is required to have the same SSID
•
and wireless mode (bandwidth/data rate) as the router. Check that the wireless adapter
on each computer can support the mode and security option you want to use.
The security option on each wireless device in the network is required to match the router.
•
For example, if you select a security option that requires a passphrase, be sure to use
same passphrase for each wireless computer in the network.

View or Change Wireless Settings

Your preset router comes set up with a unique wireless network name (SSID) and network
password. This information is printed on the label for your router. You view or change these
settings in the Wireless Settings screen.
Select Setup > Wireless Settings to display the following screen.
1.
Figure 18. Wireless Settings screen
Make any changes that are needed and click Apply when done to save your settings.
2.
Use Standard TCP/IP Properties for DHCP
on page 18.
Chapter 3. Wireless Settings | 39