Manual Setup (Basic Settings) - NETGEAR DGN1000-100NAS User Manual

N150 Wireless ADSL2+ Modem Router DGN1000 User Manual

Manual Setup (Basic Settings)

The Basic Settings screen displays when you select No. I want to configure the Router
myself in the Setup Wizard and is also available from the router menus. It is where you view
or change ISP information. The fields that display vary depending on whether or not your
Internet connection requires a login.
Check that the country and language are set as described
Note:
Wizard
Select Set Up > Basic Settings and select Yes or No depending on whether or not
1.
your ISP requires a login.
shows both forms of the Basic Settings screen.
login.
Yes. Select the encapsulation method and enter the login name. If you want to
•
change the login time-out, enter a new value in minutes.
No. Enter the account and domain names, as needed.
•
Enter the settings for the IP address and DNS server. The default DSL settings usually work
2.
fine. If you have problems with your connection, check the DSL settings and see
on page 28 for more information.
Settings
If no login is required, you can specify the MAC Address setting.
3.
Click Apply to save your settings.
4.
Click Test to test your Internet connection. If the NETGEAR website does not appear within
5.
1 minute, see
Troubleshooting
on page 24 before proceeding with the manual setup.
Figure 13, Basic Settings screen without (left) and with (right)
on page 84.
Setup
Chapter 2. Router Internet Setup
DSL
| 25