Editing Hot Palette Parameters - Lexicon NUVERB - FOR MACINTOSH Manual

NuVerb User Guide

Editing Hot Palette Parameters

From the Program Editor, click on the Fader/MIDI Cntl button to open a dialog box for Hot
Palette control assignments.
Now, let's look at how program faders are assigned to parameters. Select any program in your
library. (Don't select Large Hall, as we've already assigned Hot Palette parameters for you in
that program.). Open the Program Editor for the program you've selected. Click on the Fader/
MIDI Cntl button in the Program Editor control panel to open a Hot Fader Editor dialog.
Click here to open a menu of parameters
available for assignment to the Hot Page.
Radio buttons allow you to choose which pa-
rameters appear in the menu. Select Program
to assign parameters from the Program Over-
view. Select Effect A or Effect B (when avail-
able) to assign parameters from the Program
Editor Effect view(s). Select Hot Fader to
assign a Hot Palette fader to a MIDI controller.
(See MIDI Control.)
Note the radio buttons at the bottom of the Hot Fader Editor. The selection you make here will
determine which parameters are available as menu choices under Parameter. For now, make
sure that Program is selected.
Learning to Use NuVerb
29
29