Editing A Program - Lexicon MX500 Owner's Manual

MX500
Knob B to change the case of the character.
3. When you finish changing the name, press the Store button again and the
"Location to Store Over" screen appears. Use the Page/Select knob to select the
new user program location you want to store/copy the changes to.
4. Press the Store button again to complete the procedure.

edItIng a Program

Once a program has been loaded, you may find you want to make adjustments to it for
your particular application. Editing of programs is done using the Page/Select and
three Edit Knobs (A, B, and C) to the right of the Main Display. Each effect can
be edited independently by selecting it with the Page/Select knob. As the effect is
selected, its name is highlighted in the Main Display and three parameters become
visible for the effect at the bottom of the Main Display. The Edit Knobs can then
modify these three top level parameters.
Note: Dual Stereo programs feature a slightly different Program Screen which dis-
plays both program names. When Edit Knobs A, B, and C are turned, the three
parameters of the selected effect will be displayed momentarily for editing purposes and
then the name of the second program will reappear. (Fig. B shows Tape Delay as the
selected effect in a Dual Stereo Configuration program).
Edit Knobs A, B, and C will modify the Tape Delay effect's Tempo, Delay Time, and
Feedback parameters respectively. In addition, Surround and Stereo Configuration
program effects have several other parameters that can be modified from the Edit
Effect menus.
(Fig. A)
(Fig. B)
Using the MX500
15