Selecting The Midi Operating System - Lexicon NUVERB - FOR MACINTOSH Manual

Learning to Use NuVerb

Selecting the MIDI Operating System

Select MIDI Manager and/or OMS under Preferences in the Edit menu.
The MIDI operating system you use with NuVerb (MIDI Manager and/or OMS) must be
selected under Preferences from the Edit menu. Once you have selected one of these
operating systems, and clicked on OK, you will be asked to quit and restart NuVerb.
With two MIDI interfaces, it is possible to use both MIDI Manager and OMS at the same time.
If you are doing this, refer carefully to the instructions from the manufacturer of the MIDI
interface, and make sure each is using a different serial port: one on the printer port, and one
on the modem port.
Click to select either, or both,
MIDI operating systems.
36
36
Once you've made your selections,
click OK and restart NuVerb.
Click on MIDI Reset to remove
OMS device IDs which are no longer
in your system. After resetting,
reconfigure your MIDI setup.
Lexicon