Lexicon NUVERB - FOR MACINTOSH Manual page 103

NuVerb User Guide
Dual Delay Parameters
The Flanger
FLNGDLY (Flange Delay)
FLNGDLY is a separate 20 ms ganged stereo delay line which is controllable in single sample
steps.
LPDLY, RPDLY (Left , Right Flange Base Delays 0-479 samples = 0-20ms
LPDLY and RPDLY are base delays which get summed with the stereo ganged flange
delay.These base delays are adjustable in single sample steps throughout a 20 millisecond
range.
LFLG, RFLG (Left, Right Flange Gain)
LFLG and RFLG are flange gains which are adjustabe as a feed forward amplifier loop (+99%
positive value) or feedback amplifier loop (-99% negative value).
Delay and Feedback Controls
DLY1, DLY2 (Delay 1, Delay 2)
DLY1 and DLY2 set the delay values for the respective left to left and right to right feedback
loops
FBK1, FBK2 (Feedback 1, Feedback 2)
FBK1 and FBK2 set the gain of feedback for each of the delay lines. Available values range from
-99% to +99% gain.
APD1, APD2 (All-pass L and R Delays) 0-19996 samples = 0-2498.9ms
APD1 and APD2 are diffusors in series with the feedback loops associated with DLY1 and
DLY2. Their controls range from 0 to 10 ms. These controls essentially "tune" the diffusor delay
line.
APG1, APG2 (All-pass L and R Gain)
APG1 and APG2 are gains associated with the diffusors. You can think of them as controlling
the amount of diffusion for delay lines 1 and 2.
0-479 samples = 0- 20ms
-99% to +99%
0-19996 samples = 0-2498.9ms
-99% to +99%
0 - 191
Reference
97
97