The Midi Setup Window - Lexicon NUVERB - FOR MACINTOSH Manual

NuVerb User Guide

The MIDI Setup Window

The MIDI Setup window is used to select the MIDI drivers/devices that NuVerb will
recognize. Below is an example of this window. Familiarize yourself with its parts and
functions.
First, click here to open a menu which
allows you to choose which slot is being
configured for MIDI. The default selection
is the first NuVerb card in your system.
Once you have made port
assignments, clicking on any
of these eight fields will pop
up a menu for selection among
the MIDI devices you've
defined for your system (via
Patchbay and/or Studio
Setup).
Click on these boxes to enable
MIDI Channels. Click again to
disable recognition of MIDI
messages on that channel.
Click here to update the selected MIDI
setup without closing the window. This
allows you to confirm the MIDI connections
that have been made.
Next, click on a port assignment
box to open a menu which allows
you to choose a data port for the
selected setup.
Launch OMS
When OMS is selected from the
Preferences menu, this button is
available to open OMS Studio
Setup and make changes to the
OMS Setup.
Learning to Use NuVerb
Click here to enable
recognition of MIDI Program
Change mesages on all MIDI
channels selected for this
port.
37
37