Lexicon NUVERB - FOR MACINTOSH Manual page 26

Learning to Use NuVerb
Note the box in the middle of the display, labeled REVERBERATOR. To access the reverb
parameters within this box, click on it, or on the Reverb Edit button on the Control panel.
To display details of the Reverberator,
click on the REVERBERATOR box ...
The view changes once again to display a third level of detail.
The Reverberator parameters are also available for fader adjustment. This is the deepest level
of detail of this effect.
Click on Effect Edit to return to the previous view.
20
20
... or the Reverb Edit button.
Lexicon