Lexicon NUVERB - FOR MACINTOSH Manual page 45

NuVerb User Guide
Select a NuVerb Card
NuVerb automatically selects the first card in your system. If you have more than one
NuVerb card, click on the Slot assignment box in the MIDI Setup window to select the
location of the NuVerb card you want to configure.
Each NuVerb card in your system is identified by a Slot number. To specify which card you
want to configure, click on the Slot assignment area of the MIDI Setup window to pop up a
menu of slot numbers. The default selection is the first card in your system.
Note: You can have as many NuVerb cards in your Macintosh as you have NuBus slots. (This will vary
with Macintosh type.) A NuBus expansion chassis increases the number of slots available to
your Mac. Digidesign manufactures an expansion chassis which is certified by Lexicon for use
with NuVerb. (For information, contact either Lexicon or Digidesign)
Click here to pop up a menu
for slot selection.
Learning to Use NuVerb
39
39