Lexicon NUVERB - FOR MACINTOSH Manual page 56

Learning to Use NuVerb
Now, let's take a look at the Automation editing commands.
Editing Commands found in the Edit menu
Cut
This command removes any selected event(s) from your list. (Cut items are temporarily saved.
A paste command will insert these in a new location. Another cut or copy command will erase
them and replace them with new temporaily stored items.)
Copy
This command copies any selected event(s) from your list — leaving your list intact. Copied
items are temporaily saved, and will replace any other temporarily stored items temporarily
cut or copied.
Clear
This command deletes any selected event(s).
Paste At
This command calls up a dialog box which allows you to enter a numerical location for
insertion of the selected item(s). If more than one item is being pasted, the first event in the
group will appear at this number. This is sometimes referred to as "head sync".
Editing via the Automation window Control Panel
Offset
This command appears as a button at the bottom of the FX Automation™ window. Clicking
on it calls up a dialog box which allows you to add to or subtract from the starting time of the
selected event(s). All of the selected events will be moved by the amount you type in here.
Note that selecting Add will make the selected events appear later in the program; selecting
Subtract will make the selected events appear earlier in the program.
50
50
Lexicon