The Automation List Window - Lexicon NUVERB - FOR MACINTOSH Manual

NuVerb User Guide

The Automation List Window

Click here to enable the Automation list.
Note: you must supply MIDI Time code
to synchronize the list and provide a
timing source.
Select any list event's start-
ing timecode display, and
click here to replace it with
current timecode as dis-
played on the Hot Palette.
Click here to select a smaller window for
monitoring. (The monitor view has a button
in this location labeled Editor which returns
you to this view.
Click here to enable the
list for playback.
Click here to add a comment line
at the current timecode entry.
Keyboard Shortcuts
Record ctrl R
Play ctrl P
Editor ctrl E
Capture ctrl C
Add Comment ctrl A
Offset ctrl O
When active, click here to
open an Edit window for the
selected program.
Click here to open a dialog box
allowing offset of the selected
list item(s) by adding or sub-
tracting Time Code to their
current values.
Learning to Use NuVerb
When active, click here to
load the selected program
making it the current program
on the selected Nuverb card.
If the Hot Page is looking at
the same NuVerb card, the
Current Program display on
the Hot Page will display the
program name.
45
45