Lexicon NUVERB - FOR MACINTOSH Manual page 47

NuVerb User Guide
MIDI Source Assignment
Click on a device assignment box to pop up a menu of MIDI devices available for
assignment.
The next step is to select the MIDI Device for each assigned port. The MIDI devices available
fall into two types: OMS type devices and MIDI Manager type devices.
All the OMS devices that are defined in your OMS Studio Setup appear in a popup menu when
you click on the device setup menu. Select one by highlighting it with the mouse. If you would
like to control NuVerb with more than one OMS device, enable OMS on an additional port, set
MIDI channel and program change options, and select the additional device. Select one device
per NuVerb port (as many as eight )
The Macintosh serial ports (printer and modem) that you have enabled using MIDI Manager
appear here, along with other software which addresses the MIDI Manager, such as sequencer
programs, and drivers for MIDI interfaces. These ports are enabled using the Patchbay™ desk
accessory in the Apple menu. Select the desired MIDI Manager device from the pop up menu.
Note:
NuVerb works with MIDI Manager drivers from Opcode and Mark of the Unicorn, as well as with Apple
MIDI Manager. Contact the manufacturer for driver-specific information, as each has different options.
Click here to pop up a menu for device
assignment for each port enabled.
Learning to Use NuVerb
The menu shows the devices you have
enabled using OMS Studio Setup or
MIDI Manager Patchbay.
41
41