Lexicon NUVERB - FOR MACINTOSH Manual page 90

Reference
Random Ambience Parameters
The Ambience Generator
SIZE
SIZE allows you to vary the apparent size of the space over a wide range. SIZE is the most
dramatic control, and must be selected to match the music or effect material. It should be the
first control that you adjust to tailor the desired space. SIZE also affects the reverb time, in a
similar way to the standard reverb effects.
RTIM (Reverb Time)
RTIM adjusts the reverberation time of the independent reverberator. The range of action is
limited. Be careful — both long and short reverb times may sound unnatural. If a much longer
or shorter reverb time than the preset provides is desired, SIZE should be changed first.
RLVL (Reverb Level)
RLVL sets the amount of reverberation in the processed signal. It is normally FULL, but may
be reduced for effects where the pre-echoes should dominate.
SPIN (Randomization)
SPIN affects the rate of the movement of many of the early reflections. The object of SPIN (and
WAND) is to continuously alter the timbre of the reverberant sound. This makes the result
more natural, without making the position of instruments unstable. SPIN should typically be
20 or higher. High values may make the pitch of piano or guitar unstable.
WAND (Wander)0 - 37.1ms
WAND sets the distance in time that the early reflections will move. For best results WAND
should be about 10ms at larger sizes.
84
84
4.0 - 39.4M
0.18 - 47.82s
Off, -48 - 1dB, Up Full
0 - 48
Lexicon