Editing Programs; Storing Programs - Lexicon MPX 110 Manual

Basic Operation

EDITING PROGRAMS

The front panel Adjust and Effects Lvl/Bal knobs can both
be used to edit programs. The Adjust knob provides
instant manipulation of critical program parameters.
These parameters are arranged under the knob, meaning
that just one turn is all that is required to customize a
program to personal taste. The Effects Lvl/Bal knob can
be used to control effect level in SINGLE programs, or
effect balance in DUAL programs.
The unit recognizes changes made with either knob as
edits. When edits are made, the front panel Edit LED will
light to indicate that the selected program has been
modified but not stored.
Use the Adjust knob to edit the
selected program, and the Effects
Lvl/Bal knob to control effect level in
SINGLE programs or effect balance
in DUAL Programs. The Edit LED will
light to indicate that the selected
program has been modified from its
stored condition.
2-4

STORING PROGRAMS

To store a program in a User memory location:
1. Press the Store button. The Store LED will
flash slowly to indicate that the store
function is activated.
2. To continue saving the program, set the PROGRAM
knob to User. To cancel the store function without
saving the program, make sure the PROGRAM knob
is not set to User, then press the Store button again.
3. Set the VARIATION knob to select one of the 16 User
memory locations.
4. Press the Store button to save the program to the
selected location. The Store LED will flash quickly
until the store process is complete. The Edit LED will
no longer be lit when the saved version becomes the
selected program.
Lexicon