Download Print this page

Installing Your Ip Phone - Cisco SPA 508G Quick Start Manual

Hide thumbs Also See for SPA 508G:

Advertisement

Welcome
Thank you for choosing Datavo as your business solutions provider. This guide describes how to install your
phone and how to perform some basic tasks.

Installing Your IP Phone

Use this procedure to install the phone and connect it to your network.
Do not insert a telephone line cord into the port marked "AUX".
Step 1.
Turn the phone body over to expose the ports on the
back of the unit.
Step 2.
Insert one end of the phone cord into the slot marked
with a phone symbol (the Handset Port). Insert the
other end into thejack at bottom of handset
(not shown).
Step 3.
(Optional) Connect the desk stand by lining up the
tabs on the desk stand with the slots on the back of
the phone. Slide the bottom tabs into the slots and
lightly press down on the top of the desk stand. It
should easily slide into the top slots. Do not force.
Step 4.
If you are using an external power source, plug one end of the power cord into the building's power
outlet and insert the other end of the power cord into the phone base.
Step 5.
Connect your phone to the network using an Ethernet Connection. Insert one end of the Ethernet
cable into the network port on the phone body marked "SW." Insert the other end of the Ethernet
cable into the appropriate device, such as a network switch, onyour network.
Step 6.
(Optional) To provide network access to a PC, connect one end of an additional Ethernet cable (not
provided) to the PC port on the back of the phone body. Connect the other end of the Ethernet
cable to the network port on your PC.
Step 7.
(Optional) To install the phone on a vertical surface, use the Cisco MB100 Wall Mount bracket. See
the Cisco Small Business IP Phone SPA 50X User Guide (SIP) or the Cisco Unified Communications
Manager Express for the Cisco Small Business IP Phone SPA 50X documents on
more information. The
on
www.cisco.com
Where to Go From Here
or
http://www.datavo.com/support/voipphones/Cisco/Cisco_SPA504G_Data.pdf
Auxiliary Port
(Use only with SPA500S
Power Port
section contains links to the documentation area
myDatavo Model SPA 504G Quick Start User Guide
Wall Slots
www.cisco.com
Upper Slots
Lower Slots
PC Port
Switch
(Network) Port
Cable Slot
Headset Port
for
|
1

Advertisement

loading