Figure 3-26. Removing and Installing the System Board
1
1
screws (10)
Installing the System Board
1 Align the holes A and B on the system board to position the board correctly
in the system.
2 Replace the ten screws to secure the system board in place.
3 Reconnect the power, IPMB, SATA, front panel, and system board
connectors to the system board. See "System Board Connectors" on
page 111.
4 Replace the processors. See "Installing the Processor" on page 59.
5 Replace the heat sinks. See "" on page 57.
6 Replace the expansion-card riser. See "Installing the Expansion-Card Riser"
on page 67.
7 Replace the memory modules. See "Installing Memory Modules" on
page 65.
8 Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 55.
9 Replace the system cover. See "Closing the System" on page 54.
10 Reconnect the system and peripherals to their electrical outlets, and turn
on the system.
94
Installing System Components
2
2
system board assembly