Jumper Settings; System Configuration Jumper Settings - Dell PowerEdge C1100 Hardware Owner's Manual

1 PCI-E daughter card connector
3 ethernet connector port
5 back USB connectors
7 serial connector
9 processor 0 power connector 1
11 processor 0 power connector 2
13 main power connector
15 DDR3 DIMM slots (for processor 1) (9) 16 IPMB connector
17 SATA II connectors
19 front panel connector

Jumper Settings

CAUTION:
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.

System Configuration Jumper Settings

The function of system configuration jumper installed on each system board
is shown below.
112
Jumpers and Connectors
Many repairs may only be done by a certified service technician.
2 processor 0
4 KVM over IP Port
6 video connector
8 system identification button
10 DDR3 DIMM slots (for processor 0) (9)
12 processor 1
14 processor 1 power connector
18 front USB connectors
20 port 80