Remote Access Configuration - Dell PowerEdge C1100 Hardware Owner's Manual

Dell server hardware owner's manual
Hide thumbs Also See for PowerEdge C1100:
Table of Contents

Advertisement

Remote Access Configuration

Option
Remote Access (Enabled
default)
Serial Port Number
(COM1 default)
Current SOL Baud Rate
Serial Port Mode
(115200 8,n,1 default)
Flow Control
(None default)
Redirection After BIOS
POST (Enabled default)
Terminal Type
(ANSI default)
NOTE:
When Flow Control is set to Software, the Hyper Terminal on remote side is
discontinued by pressing <Ctrl><S>. But the <Ctrl><S> is also the Setup Key Stroke
for setting onboard NIC PXE Option ROM Configuration. Therefore, we suggest
users change <Ctrl><S> to <Ctrl><B> in PXE OPROM Configuration in order to avoid
that the Hyper Terminal on remote side is discontinued when pressing <Ctrl><S>.
44
Using the System Setup Program
Description
Selects remote access type.
Selects serial port for console redirection.
Displays the current SOL Baud Rate.
Selects serial port settings. The default value may change
if SOL baud rate is fixed by customer request.
Selects flow control for console redirection.
Selects the settings for the redirection.
• Disabled: turns off the redirection after POST.
• Enabled: redirection is always active.
Selects the target terminal type.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge cs24-ty

Table of Contents