Memory Configuration; Ide Configuration - Dell PowerEdge C1100 Hardware Owner's Manual

Memory Configuration

Option
Current Memory
Frequency (1066 MHz
default)
Memory Turbo Mode
(Disabled default)
Memory Frequency
(Auto default)
Memory Mode
(Independent default)
Throttling - Closed Loop
(Enabled default)
Throttling - Open Loop
(Enabled default)

IDE Configuration

Option
SATA#1 Configuration
(Enhanced default)
Configure SATA as
(IDE default)
Hard Disk Write Protect
(Disabled default)
IDE Detect Time Out
(Sec)
38
Using the System Setup Program
Description
Displays the current memory frequency
Displays the memory turbo mode.
Forces a DDR3 frequency slower than the common tck
detected via SPD.
Selects the memory mode.
Enables BIOS to program Closed Loop throttling for
memory components.
Enables BIOS to program Open Loop throttling for
memory components.
Description
Configures the SATA#1.
Configures the SATA.
• IDE
• AHCI
• RAID
Enables or disables device write protection. This is
effective only if the device is accessed through BIOS.
Selects the time out value for detecting ATA/ATAPI
device(s).