Beep Codes - Dell PowerEdge C1100 Hardware Owner's Manual

Code Log in BMC Error Message
8301 Yes
8302 Yes
8601 Yes
8701 Yes

Beep Codes

The following table describes the beep codes that are used in boot block:
Number of Beeps
1
2
3
4
5
7
8
10
11
Not enough space in
Runtime area!
SMBIOS data will
not be available.
Not enough space in
Runtime area!
SMBIOS data will
not be available.
Error: BMC Not
Responding
Insufficient Runtime
space for MPS data.
System may operate
in PCI or Non-MPS
mode.
Description
No media
Boot-block bios file absent
Insert next diskette in A:
Flash program successful
Read file error
No flash present
Floppy controller error
Flash erase error
Flash program error
Corrective Action
See "Troubleshooting System Memory"
on page 103.
If the problem persists, see "Getting
Help" on page 119.
See "Troubleshooting System Memory"
on page 103.
If the problem persists, see "Getting
Help" on page 119.
Remove AC power to the system for
10 seconds and restart the system.
If the problem persists, see "Getting
Help" on page 119.
Remove AC power to the system for
10 seconds and restart the system.
If the problem persists, see "Getting
Help" on page 119.
About Your System
31