Backplane Jumper Settings - Dell PowerEdge C1100 Hardware Owner's Manual

Backplane Jumper Settings

CAUTION:
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
Figure 5-3. 3.5-Inch Hard-Drive Systems Backplane Jumpers
The function of jumpers installed on backplane is shown below:
Table 5-2. Jumpers Installed on Backplane
Jumper
J22
J23
NOTE:
The "*" in the table of system configuration jumper describes the default
status and the default state is not active state. When connecting the 1CH SAS
daughter card, insert the jumper cover onto the hard drive type select jumper. For
onboard SATAII connectors, do not insert the jumper cover onto the hard drive type
select jumper.
114
Jumpers and Connectors
Many repairs may only be done by a certified service technician.
Function
SGPIO connection *Disable
RAID Card setting
Off
*Disable
On
Enable
Enable