Replacing Bms Control Unit - BMW C1 200 Repair Manual

Replacing injection nozzle holder
– Open the seat
....................................................See Group 52
a
– Release front guard plate from frame and fold
forward
d
Warning:
Comply with safety precautions when handling or
working with fuel; note that the fuel lines are pressu-
rised!
17 5 500
1
•
Use hose clamps, BMW No. 13 3 010, to close
off fuel hoses (arrows)
•
Use pliers, BMW No. 17 5 500, to release hose
clamps
•
Disconnect the fuel hoses
•
Release injector attachments (1, 2)
•
Remove injection nozzle holder by pulling up
When installing:
•
Installation is the reverse of the removal proce-
dure
X
Torque specification:
Injector attachment
(+ Loctite 243) ................................................ 4 Nm
13 61 025
– Open the seat
– Remove the backrest
....................................................See Group 52
a
– Remove the rear storage compartment
....................................................See Group 46
a
13 3 010
2
13 3 010
•
Undo the plug-in connection (arrow) by pulling
the red retainer up whilst simultaneously pulling
C1130110
the plug to the right
•
Remove fasteners (arrows) securing the BMS
control unit
•
Remove the BMS control unit
When installing:
•
Installation is the reverse of the removal proce-
dure
X
Torque specification:
BMS control unit mount ................................. 5 Nm

Replacing BMS control unit

C1120050
C1120040
13.7