Checking Bearing; Replace Grooved Ball Bearing And Needle Bearing For Secondary Inside Plate - BMW C1 200 Repair Manual

Checking bearing

•
Subject inside grooved ball bearing (2) and nee-
dle bearing (4) on inside pulley (1) to a visual and
manual inspection
•
The bearings should turn without noise or resist-
ance
•
Check bearings for secure fit
24.16
1
2
3
4
11 7 645
Replace grooved ball bearing and needle bear-
ing for secondary inside plate
•
Use support ring, BMW No. 36 6 610, and ex-
tractor, BMW No. 00 8 570, to remove needle
bearing (4)
•
Remove circlip (3)
•
Use drift punch (arrow) to drive out grooved ball
bearing (2)
•
Use tube, BMW No. 11 7 645, to press out nee-
dle bearing
•
Press out ball bearing
C1110610