Replacing Refill Reservoir - BMW C1 200 Repair Manual

Replacing refill reservoir

17 11 110
– Remove front fairing panel
– Swing the headlight forward and down
....................................................See Group 46
a
•
Remove the cap
1
4
•
Remove fasteners (2, 4) from refill reservoir
•
Release hose clamps (arrows) with pliers,
BMW No. 17 5 500
•
Pull refill reservoir to one side
•
Disconnect vapour discharge hose (1) from refill
reservoir
•
Disconnect coolant hose (3) from refill reservoir
1
•
Turn refill reservoir so that hose clamp (arrow)
can be opened
•
Release hose clamp (arrow) with pliers,
BMW No. 17 5 500
•
Disconnect vent hose (1) from refill reservoir
17.20
When installing:
e
Always make sure that hose clamps are correctly
positioned in order to ensure easy access whenever
necessary.
Make sure the hoses are routed well away from any
components that could cause rubbing and abrasion!
2
•
•
•
17 5 500
X
Refill reservoir mount .................................... 9 Nm
3
C1170290
17 5 500
C1170301
Attention:
Installation is the reverse of the removal proce-
dure
Add coolant
After running the engine check the coolant level
and top up if necessary
Torque specification: