Injector; Removing And Installing Injectors; Replacing Injector - BMW C1 200 Repair Manual

Injector

Removing and installing injectors

– Open the seat
....................................................See Group 52
a
– Release front guard plate from frame and fold
forward
d
Warning:
Comply with safety precautions when handling or
working with fuel; note that the fuel lines are pressu-
rised!
1
3
•
Use hose clamps, BMW No. 13 3 010, to close
off fuel hoses (arrows)
•
Undo plug-in connection (3)
•
Release injector attachments (1, 2)
•
Extract injector by pulling up
When installing:
•
Installation is the reverse of the removal proce-
dure
X
Torque specification:
Injector attachment
(+ Loctite 243) ................................................ 4 Nm
13.6

Replacing injector

– Open the seat
....................................................See Group 52
a
– Release front guard plate from frame and fold
forward
– Remove injector
d
Warning:
Comply with safety precautions when handling or
working with fuel; note that the fuel lines are pressu-
rised!
13 3 010
2
13 3 010
C1130110
•
Remove spring clip (arrow)
•
Remove injector
When installing:
•
Installation is the reverse of the removal proce-
dure
X
Torque specification:
Injector attachment
(+ Loctite 243) ................................................ 4 Nm
C1130120