Inspect Individual Components Of Drive Variator; Variator Cover; Checking Belt; Check Crankshaft Journal - BMW C1 200 Repair Manual

Inspect individual components of drive
variator

Variator cover

•
Clean variator cover and check for damage
•
Replace as indicated

Checking belt

•
Check for cracks and damage
•
Replace as indicated
Wear data:
Width.........................................................17.8 mm
.............................................................. (0.7008 in)

Check crankshaft journal

•
Check crankshaft journal for bearing tube (spac-
er) of inside plate
•
Remove all traces of old Loctite from the threads
•
Check threads and tooth profiles for damage and
distortion
Wear data:
External Ø ..............................................16.95 mm
.............................................................. (0.6673 in)

Check bearing tube (spacer)

•
Check bearing tube (spacer)
Wear data:
External Ø ............................................... 26.95 mm
.............................................................. (1.0610 in)

Check primary external plate

•
Check friction faces of both side plates for wear
and damage
C1110460
•
Check with a precision straightedge and feeler
gauge
•
Check internal diameter of outside plate
Wear data:
Max. contact surface distortion ................... 0.5 mm
.............................................................. (0.0197 in)
Internal Ø of outer plate........................... 27.05 mm
.............................................................. (1.0650 in)
C1110470
C1110480
24.11