•
Open cable ties (arrows)
•
Disconnect plug (1) for right turn indicator
•
Remove fastener (2) for rear frame member
•
Remove fastener (3) securing spring strut to rear
frame member
•
Remove rear frame
When installing:
•
While installation is basically a reversal of the re-
moval process, careful attention should be di-
rected toward the following:
e
Attention:
Make sure that all cables are correctly routed and
secured in place with cable ties!
X
Torque specification:
Rear frame member mount........................... 21 Nm
Strut to rear frame member .......................... 41 Nm
46.56
2
1
3
C1460780
Luggage system bracket
Bracket removal and installation
–
Remove the rear storage compartment
1
•
Undo mounts (arrows) at bracket/rear frame
member
•
Undo upper bracket mount (1) on frame
•
Remove bracket
When installing:
•
Installation is the reverse of the removal proce-
dure
X
Torque specification:
Bracket to frame ............................................ 8 Nm
Bracket to rear frame ................................... 21 Nm
C1460980