Replacing throttle cable
32 72 305
–
Remove handlebar trim
–
Remove instrument trim
–
Open the seat
....................................................See Group 46
a
–
Remove combination switch on right
•
Pull rubber cap (2) down
•
Remove fastener (1) for throttle cable
•
Disengage throttle cable from holder and cam
disc
•
Remove throttle cable
When installing:
•
While installation is basically a reversal of the re-
moval process, careful attention should be di-
rected toward the following:
•
Check throttle cable play, adjusting if necessary
Adjustment data:
Move the handlebars all the way from left to right
and ensure that throttle valve does not move
X
Torque specification:
Combination switch mount............................. 4 Nm
Throttle cable mount ...................................... 8 Nm
1
2
C1130060
32.13