ZyAIR G-4100 User's Guide
23.3.3 Manual Boot Code Upgrade Using the Web Configurator
You might upgrade the boot code to v1.03 only if you are
upgrading to firmware version v1.00(ZB.3)c0 or higher from a lower
version. In this case, you must upgrade the firmware BEFORE you
upgrade the boot code.
Follow the steps below to upload the boot code using the web configurator.
Click SYSTEM TOOLS, FIRMWARE and then Manual Firmware Upgrade to display the
1.
screen as shown.
Figure 23-11 Manual Boot Code Upgrade Using the Web Configurator
Specify the name of the boot code file in the Local PC File Path field or click Browse to locate
2.
the file and click Apply to start the file transfer process. The boot code must be a binary file and
should have a .rom extension.
When the file transfer is completed successfully, a restart message displays and the ZyAIR
3.
automatically restarts.
WARNING!
Do not interrupt the file upload process as this may
PERMANENTLY damage the device.
23-8
Figure 23-12 System Restart
Configuration, Firmware and Accounting Log Maintenance