Restarting The Zyair; Logging Out Of The Web Configurator; Figure 2-9 Restart; Figure 2-10 Logging Out - ZyXEL Communications ZYAIR G-4100 User Manual

LABEL
Reset the system back to factory defaults
Keep subscriber Select this option to reset the system configuration back to the factory default but
profile retain subscriber account information. All other custom configuration is erased.
Apply Click Apply to reset system configuration back to the factory defaults.
2.8

Restarting the ZyAIR

You must restart the ZyAIR every time you change the system IP address or upload a firmware or
configuration file.
Click SYSTEM TOOLS, RESTART and then Apply.
When the ZyAIR restarts, all connections will be terminated.
Anyone using a system account will need to log in again. The
subscribers may also need to log in again.
2.9

Logging Out of the Web Configurator

Click LOGOUT to exit from the web configurator.
The Web Configurator

Table 2-4 Reset to Default Settings

DESCRIPTION

Figure 2-9 Restart

Figure 2-10 Logging Out

ZyAIR G-4100 User's Guide
2-11