Using An Exclusive Printer To Create And Print Subscriber Statements; Viewing The Account List; Figure 8-6 Account List; Table 8-3 Account List - ZyXEL Communications ZYAIR G-4100 User Manual

8.4.2 Using an Exclusive Printer to Create and Print Subscriber Statements

Follow the steps below to setup and create subscriber accounts and print subscriber statements using
an external statement printer.
Step 1. Make sure that the printer is connected to the appropriate power and the ZyAIR, and that there is
printing paper in the statement printer. Refer to the printer's User's Guide for details.
Step 2. Press the button on the statement printer. The ZyAIR generates a dynamic account and the printer
prints the subscriber's statement. Refer to Figure 8-4 for a printout example.
Refer to section 8.3 to configure the printout page.
8.5

Viewing the Account List

Do one of the following to view the account list.
•
From the Account Generator Panel screen (refer to Figure 8-3) and click View Account List.
•
From the SYSTEM STATUS sub-menus, click ACCOUNT LIST.
The following table describes the labels in this screen.
LABEL
Refresh Click Refresh to update this screen.
S/N This field displays the index number of an entry. The maximum number of subscriber account
entries is 512.
Status This field displays IN-Used when the account is currently in use. Otherwise it displays UN-
Used.
Username This field displays the account user name. Click the heading to sort the entries in ascending or
descending order based on this column.
Usage Time This field displays the amount of time the subscriber has purchased. Click the heading to sort
the entries in ascending or descending order based on this column.
Time Created This field displays when the account was created (in yyyy/mm/dd hh/mm/ss format). Click the
heading to sort the entries in ascending or descending order based on this column.
Accounting

Figure 8-6 Account List

Table 8-3 Account List

DESCRIPTION
ZyAIR G-4100 User's Guide
8-7