Manual Firmware Upgrade Via Tftp Server; Figure 23-9 System Restart; Figure 23-10 Manual Firmware Upgrade Via Tftp Server - ZyXEL Communications ZYAIR G-4100 User Manual

After the ZyAIR finishes restarting, access the web configurator again. Check the firmware version
8.
number in the System screen.
When the ZyAIR restarts, all connections terminate.
Subscribers need to log in again.

23.3.2 Manual Firmware Upgrade via TFTP Server

Use the following procedure to use TFTP to upload the firmware from a TFTP server to the ZyAIR.
Download the latest firmware from
1.
it is zipped.
Run a TFTP server program and specify the location of the firmware file and the communication
2.
mode. Refer to the documentation that comes with your TFTP server program for instructions.
Access the web configurator. Refer to the section on accessing the web configurator for
3.
instructions.
Click SYSTEM TOOLS, FIRMWARE and then Manual Firmware Upgrade to display the
4.
screen as shown.

Figure 23-10 Manual Firmware Upgrade via TFTP Server

Specify the IP address of the TFTP server in the Remote TFTP Server IP Address field.
5.
Specify the name of the firmware file in the File Name field.
6.
Click Apply to start the file transfer process.
7.
When the file transfer is completed successfully, the following message displays and the ZyAIR
8.
restarts automatically to complete the firmware upgrade process.
After the ZyAIR finishes restarting, access the web configurator again. Check the firmware version
9.
number in the System Status screen.
Configuration, Firmware and Accounting Log Maintenance

Figure 23-9 System Restart

www.zyxel.com and store it in a TFTP server. Unzip the file if
ZyAIR G-4100 User's Guide
23-7