ZyXEL Communications ZYAIR G-4100 User Manual page 205

7. In the Internet Protocol TCP/IP Properties
window (the General tab in Windows XP):
-Click Obtain DNS server address
automatically if you do not know your DNS
server IP address(es).
-If you know your DNS server IP address(es),
click Use the following DNS server addresses,
and type them in the Preferred DNS server and
Alternate DNS server fields.
If you have previously configured DNS servers,
click Advanced and then the DNS tab to order
them.
8. Click OK to close the Internet Protocol (TCP/IP) Properties window.
9. Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window.
10. Close the Network Connections window (Network and Dial-up Connections in Windows
2000/NT).
11. Turn on your ZyAIR and restart your computer (if prompted).
1. Click Start, All Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also open
Network Connections, right-click a network connection, click Status and then click the Support tab.
Setting Up Your Computer's IP Address
Verifying Your Computer's IP Address
ZyAIR G-4100 User's Guide
G