25.1 About Ping Command
Use the ping function to check the ZyAIR's network connection.
25.2 Using Ping Command
Click SYSTEM TOOLS and then PING COMMAND to open the following screen.
The following table describes the labels in this screen.
LABEL
Type the IP address of a device on the WAN that you want to ping in order to test the Internet
connection.
Destination IP
Address
Ping
Click this button to have the device ping the IP address.
Ping Command
This chapter covers how to use the PING COMMAND screen.
Table 25-1 PING COMMAND
DESCRIPTION
This feature tests your Internet connection, so
the destination IP address must be on the WAN. Do
not use a LAN IP address.
ZyAIR G-4100 User's Guide
Chapter 25
Ping Command
25-1