Chapter 2 The Web Configurator; Introducing The Web Configurator; Accessing The Web Configurator; Figure 2-1 Entering Zyair Ip Address In Internet Explorer - ZyXEL Communications ZYAIR G-4100 User Manual

This chapter introduces how to access the web configurator to perform general system
2.1

Introducing the Web Configurator

The web configurator is best viewed with Internet Explorer (version 4.0 or above) or Netscape
Navigator (version 6.0 or above). Your browser must have JavaScript support enabled.
2.2

Accessing the Web Configurator

Follow the steps below to access the web configurator.
The ZyAIR allows only one web configurator session at a time.
Step 1. Make sure your ZyAIR is properly connected (refer to instructions in the Quick Start Guide on
hardware installtion and connections).
Step 2. Launch your web browser and type the WAN or LAN IP address of the ZyAIR as the web address (it is
recommended that you connect your computer to the LAN and use the LAN IP address for initial
configuration). 192.168.1.1 is the default IP address for the LAN port.
If you are using a different port number (between 8000 and 8099) for the web server, you must also
append the port number to the LAN IP address seperated with a colon ":", for example,
http://192.168.1.1:8080.

Figure 2-1 Entering ZyAIR IP Address in Internet Explorer

Step 3. A login screen displays. Type "admin" (default) as the user name and "1234" (default) as the password
and click Login.
The user name and password are case sensitive.
The Web Configurator
The Web Configurator
ZyAIR G-4100 User's Guide
Chapter 2
configuration.
2-1