Firmware Upgrade Using The Web Configurator; Figure 14-2 Smt: Firmware Upgrade; Figure 14-3 Smt: Firmware Upgrade Process 1; Figure 14-4 Smt: Successful Firmware File Transfer - ZyXEL Communications ZyXEL Vantage VSG-1000 User Manual

VSG-1000 Vantage Service Gateway
Type 1 and press [ENTER] to display the Firmware Upgrade screen.
Step 4.
Enter the IP address of the computer running the TFTP server in the TFTP Server IP Address field.
Step 5.
Specify the name of the firmware file in the Download Filename field.
Step 6.
Enter the command key and press enter.
Type E at the "Enter Selection:" prompt to get the firmware file from the TFTP server. You may type A
Step 7.
to abort the firmware transfer at this point.
A)bort Download:
The following message displays when the firmware is transferred successfully to the VSG. The VSG
Step 8.
automatically restarts after the firmware upgrade is complete. Check the firmware version in the login
screen.
14.3.2

Firmware Upgrade Using the Web Configurator

Follow the steps below to upload the firmware using the web configurator.
Run a TFTP server program and specify the location of the firmware file and the communication mode.
Step 1.
Refer to the TFTP server program user's guide for instructions.
Access the web configurator. Refer to the section on accessing the web configurator for instructions.
Step 2.
In the Main Menu screen, click Utilities and Firmware Upgrade to display the screen as shown.
Step 3.
14-2
TFTP Server IP Address :
Filename
E)xecute Download R)eturn to Main Menu
Enter Selection:

Figure 14-2 SMT: Firmware Upgrade

TFTP Server IP Address :10.10.10.10
Filename
|---------+---------+---------+---------+---------|
**************************************************
Press 'A' to break download.

Figure 14-3 SMT: Firmware Upgrade Process 1

Saving the downloaded image file....
Saving data. Please wait...

Figure 14-4 SMT: Successful Firmware File Transfer

Firmware Upgrade
:
:VSG1000.bin
Configuration and Firmware Maintenance
M)odify