VSG-1200 V2 User's Guide
4 Specify the firmware file name in the Local PC File Path field (or click Browse to locate
it).
5 Click Apply to start the file transfer process.
6 When the file transfer is completed successfully, the following message displays and the
VSG automatically restarts to complete the firmware upgrade process.
Figure 144 Web Configurator: Firmware Upgrade Successful
7 After the VSG finishes restarting, access the web configurator again. Check the firmware
version number in the System Status screen.
30.2.1 Manual Firmware Upgrade via a TFTP Server
Follow the steps below to upload the firmware using the web configurator.
1 Download the latest firmware from www.zyxel.com and store it in a TFTP server. Unzip
the file if it is zipped.
2 Run a TFTP server program and specify the location of the firmware file and the
communication mode. Refer to the documentation that comes with your TFTP server
program for instructions.
3 Access the web configurator. Refer to the section on accessing the web configurator for
instructions.
4 Click System Tools, Firmware and the Manual Firmware Upgrade link to display the
screen as shown.
Figure 145 Firmware: Manual Upgrade Using TFTP
5 Specify the IP address of the TFTP server in the TFTP Server IP Address field.
6 Specify the name of the firmware file in the Binary File Name field.
7 Click Apply to start the file transfer process.
8 When the file transfer is completed successfully, the following message displays and the
VSG automatically restarts to complete the firmware upgrade process.
9 After the VSG finishes restarting, access the web configurator again. Check the firmware
version number in the System Status screen.
203
Chapter 30 Firmware