18.1 Syslog Configuration
Use the SYSLOG Syslog screen to configure to where the ZyAIR is to send logs.
To configure the syslog settings, click ADVANCED, SYSLOG to display the screen as shown next.
The following table describes the labels in this screen.
LABEL
Send to Syslog Server
Syslog Server on LAN
Server IP Address
Server MAC Address
Syslog
This chapter shows you how to configure syslog on the ZyAIR.
Figure 18-1 Syslog
Table 18-1 Syslog
Select Enable to activate the syslog function.
Select Disable to de-activate the syslog function.
Select this check box to specify a syslog server on the LAN.
Enter the IP address (in dotted decimal notation) of the syslog server on the LAN.
Enter the MAC address of the syslog server on the LAN.
ZyAIR G-4100 User's Guide
Chapter 18
DESCRIPTION
Syslog
18-1