Table 13-1 Filtering - ZyXEL Communications ZYAIR G-4100 User Manual

ZyAIR G-4100 User's Guide
LABEL
Filtering Enable filtering to block subscriber access to specified Internet websites or IP
addresses.
HTTP Message to Enter a message to display on the subscriber's screen when the system blocks access
display when a to a website.
website is blocked
The default message is "This Web Site is blocked by System".
Please enter new Use these fields to add to the list of forbidden destinations.
restricted
destination (up to 50
entries)
URL or Website Enter the full URL of the website to which you want to block subscriber access for
example, "http://www.yahoo.com". You can use up to 200 characters.
Start / End IP Enter the beginning and ending IP addresses of a range of IP addresses to which you
Address want to block subscriber access.
IP Address Enter an IP address to which you want to block subscriber access.
Subnet Mask Enter the subnet mask of the IP address to which you want to block subscriber access.
Add to List Click this button to add a new entry to the list of restricted destinations.
Restricted This table lists Internet destinations to which the system is to block subscriber access.
Destination List
No This is the index number of a destination entry.
Active Select this check box to block subscriber access to this destination.
Address List This field displays the destination address(s).
Delete Select this(ese) checkbox(es) and click Apply to remove the destination entry.
Delete All Click this button to remove all of the destination entries.
Apply Click Apply to save the new settings.
13-2

Table 13-1 FILTERING

DESCRIPTION
Filtering