The following table describes the fields in this screen.
LABEL
Web Server
HTTP Port
WAN, LAN and Server Setup
Figure 4-2 SERVER
Table 4-2 SERVER
Select this radio button if you want to access the ZyAIR using unsecured HTTP.
Specify the port number of the embedded web server on the ZyAIR for accessing the
web configurator. The default port number is 80. Changing the port number helps
protect the ZyAIR's web configurator from hacker attacks.
Enter a number between 8010 and 8060 to access the web configurator behind a NAT-
enabled network.
If you enter a number between 8010 and 8060, you need to append the port number to
the WAN or LAN port IP address to access the web configurator. For example, if you
enter "8010" as the web server port number, then you must enter
"http://192.168.1.1:8010" where 192.168.1.1 is the WAN or LAN port IP address.
ZyAIR G-4100 User's Guide
DESCRIPTION
4-7