Syslog Log Settings Configuration - ZyXEL Communications ZYAIR G-4100 User Manual

ZyAIR G-4100 User's Guide
LABEL
Syslog Server on
WAN
Server 1 IP Address
Server 2 IP Address
Send to Email
Email Server
IP Address or Domain
Name
SMTP Port
E-mail (SMTP) server
needs to check my
account
Username
Password
Email From:
Name
Email Address
Email To:
Email Address 1,2
Apply

18.2 Syslog Log Settings Configuration

Use the SYSLOG Log Settings screen to configure which logs the ZyAIR is to send and the schedule for when
the ZyAIR is to send the logs.
Click ADVANCED, SYSLOG, Log Settings to display the screen as shown next.
18-2
Table 18-1 Syslog
Select this check box to specify a syslog server on the WAN.
Enter the IP address of the first syslog server on the WAN in dotted decimal notation.
Enter the IP address of the second syslog server on the WAN in dotted decimal
notation.
Select Enable to have the ZyAIR send syslog messages to the e-mail account that
you specify.
Select Disable to not have the ZyAIR send syslog e-mail messages.
Enter the IP address or domain name of the mail server for the e-mail addresses
specified below. If this field is left blank, the syslog will not be sent via e-mail.
Enter the port number (25, or between 2500 and 2599) for the mail server. The
default is 25.
Select this check box if your SMTP server requires user name and password
authentication before accepting e-mail. Your network administrator, SMTP server
provider or ISP should supply the username and password.
Enter the username for the SMTP server.
Enter the password for the SMTP server.
Type a name that you want to be in the "message from" field of the log e-mail
message that the ZyAIR sends.
Enter your e-mail address. This is the address others use to send e-mail to Email
Address 1/Email Address 2.
Enter your first and second e-mail addresses to which the ZyAIR is to send the syslog
e-mails. If you leave these fields blank, logs will not be sent via e-mail.
Click Apply to save the settings.
DESCRIPTION
Syslog