Restore Configuration Using Tftp; Firmware Upgrade; Figure 23-7 Configuration: Restore Using Tftp - ZyXEL Communications ZYAIR G-4100 User Manual

23.2.4 Restore Configuration Using TFTP

This section shows you how to upload a new or previously saved configuration file from a TFTP
server to your ZyAIR.
This function erases the current configuration before restoring
a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
Click System Tools and Configuration. A screen displays as shown next.
1.

Figure 23-7 CONFIGURATION: Restore Using TFTP

Enter the IP address of the TFTP server in dotted decimal notation in the Remote TFTP Server IP
2.
Address field.
Specify the file name of the configuration file in the File Name field.
3.
Click Apply to start the configuration restore process. The ZyAIR automatically restarts after the
4.
restoration process is complete.

23.3 Firmware Upgrade

There are two ways to upgrade firmware to the ZyAIR: manually or scheduled.
To manually upgrade the firmware, you have to download the latest firmware first from
www.zyxel.com and then upload it to the ZyAIR. You can upload it to the ZyAIR using the Web
Configurator or using a TFTP server.
With scheduled firmware upgraded, you need to set up a TFTP server where the ZyAIR can
automatically download the latest firmware at the specified time.
Configuration, Firmware and Accounting Log Maintenance
ZyAIR G-4100 User's Guide
23-5